Please use this identifier to cite or link to this item:
|Title:||Microstructure and mechanical properties of ductile aluminium alloy manufactured by recycled materials|
|Keywords:||Aluminium alloys;High pressure die casting;Materials recycling;Mechanical properties;Microstructure|
|Publisher:||Trans Tech Publications Ltd|
|Citation:||Materials Science Forum, 794-796: 1077 - 1082, (June 2014)|
|Abstract:||The present paper introduces the microstructure and mechanical properties of the Al-Mg- Si-Mn alloy made by recycled materials, in which the impurity levels of iron are mainly concerned. It is found that the increased Fe content reduces the ductility and yield strength but slightly increases the UTS of the diecast alloy. The tolerable Fe content is 0.45wt.%, at which the recycled alloys are still able to produce castings with the mechanical properties of yield strength over 140MPa, UTS over 280MPa and elongation over 15%.The Fe content is steadily accumulated in the alloy with the increase of recycle times. However, after 13 cycles, the recycled alloys are still able to produce ductile alloys with satisfied mechanical properties.|
|Appears in Collections:||Brunel Centre for Advanced Solidification Technology (BCAST)|
Items in BURA are protected by copyright, with all rights reserved, unless otherwise indicated.