Please use this identifier to cite or link to this item:
Title: Boundary element modelling and full scale measurement of the acoustic performance of outdoor noise barriers
Authors: Morgan, Philip Alan
Advisors: Chandler-Wilde, SN
Keywords: Absorptive barriers;Destructive interference;Diffracting edges;Multiple-edge barrier;Inclined base panel
Issue Date: 1999
Publisher: Brunel University, School of Information Systems, Computing and Mathematics
Abstract: The performance of various designs of outdoor noise barrier has been investigated using numerical modelling and full scale experiments. The numerical modelling has been performed using a two-dimensional boundary element method. The model has been extended to allow the efficient simulation of barrier arrangements on ground having two distinct impedance values and cross-sections incorporating cuttings. It has been reported previously that the performance of a plane screen can be enhanced by adding a device to the top of the barrier to induce destructive interference. Full scale modelling and boundary element simulations have been performed on one such commercially available device. It has been shown that, taking the height increase into account, the major contribution to the improved performance is the presence of two diffracting edges rather than any interference effects generated. It is known that the performance of a single barrier is degraded following the introduction of a barrier on the opposite side of a source. Boundary element simulations of such parallel arrangements have been performed. Modifications have been proposed to reduce the over-estimation of multiple reflections within the model, together with a method for converting predictions to the equivalent point source values. Sound absorptive, tilted and median barriers have been shown to be effective in reducing the degradation. A multiple-edge barrier configuration is known to offer improved screening performance over a plane screen. Reported in-situ measurements have suggested the behaviour to be influenced by site geometry. Boundary element calculations have been performed to identify a more efficient variant of the device. The results suggest the addition of an inclined base panel to be most effective. The boundary element model has been used to investigate the effect of shape and surface treatment upon railway noise barriers. The model has been adapted to allow the use of dipole sources characteristic of railway noise. The cross-section of the rolling stock has been shown to affect the performance of rigid barriers. If the upper edges are coincident, the results suggest that simple absorptive barriers provide better screening than tilted designs. The addition of multiple edges further enhances performance.
Description: This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel University, 12/11/1999.
Appears in Collections:Dept of Mathematics Theses
Mathematical Sciences

Files in This Item:
File Description SizeFormat 
FulltextThesis.pdf22.93 MBAdobe PDFView/Open

Items in BURA are protected by copyright, with all rights reserved, unless otherwise indicated.