Please use this identifier to cite or link to this item:
|Title:||Development of a general numerical methodology for CFD analyses In sliding vane machines and application on a mid-size oil injected air compressor|
|Keywords:||CFD;Sliding vane machine;Positive displacement machine;Compressor;Oil injection|
|Publisher:||Purdue University Libraries|
|Citation:||Conference Proceedings of 23rd International Compressor Engineering, Purdue University, Indiana, USA, 11-14 July (2016)|
|Abstract:||The current work presents the development of a numerical methodology to investigate sliding vane rotary machines by means of advanced design tools such as the Computational Fluid Dynamics ones. Although highly limited in this topic, literature shows that the major constraint for the employment of such approaches is the deformation and motion of the rotor mesh, i.e. the computational grid related to the fluid volume between stator, rotor and blades of the positive displacement vane device. To address these issues, a novel grid generation approach is herein proposed and accomplished through a series of steps: geometrical 2D modeling of the machine cross section profile, boundary generation of the rotor mesh and, eventually, distribution of computational nodes using algebraic algorithms with transfinite interpolation, post orthogonalization and smoothing. This methodology was subsequently tested on an industrial vane compressor comparing the results of oil free and oil injected simulations set up in the ANSYS CFX solver. Results show angular pressure evolution inside the compressor vanes, a recirculation region induced by the clearance between the vane tip and the stator as well as the cooling effects of the oil entrained in the cells during the compression phase.|
|Appears in Collections:||Dept of Mechanical Aerospace and Civil Engineering Research Papers|
Items in BURA are protected by copyright, with all rights reserved, unless otherwise indicated.