Please use this identifier to cite or link to this item:
Title: Effect of ultrasonic processing on a direct chill cast AA6082 aluminium alloy
Authors: Salloum-Abou-Jaoude, G
Eskin, D
Barbatti, C
Jarry, P
Jarrett, M
Fan, Z
Issue Date: 2017
Citation: Light Metals 2017, pp. 997 - 1003, 2017
Abstract: For many years now, ultrasonic melt treatment (UST) has proven itself to promote grain refinement in aluminium alloys. The current work presents cavitation-aided grain refinement obtained on commercial AA6082 DC-cast billets. Grain refinement was achieved while applying UST in the crucible away from the sump, prior to casting. Since in high strength alloys, Zr and Ti are commonly present as alloying elements for anti-recrystallization and corrosion resistance properties, their as well as UST parameters influence on the microstructure are studied and presented. Primary Al3(Zr1-x-y ,Tix , Siy) intermetallics were found in the centre of the α-Al grains. This suggests that UST may have forced the nucleation and refinement of primary intermetallics influencing the subsequent solidification process when Al3(Zr1-x-y , Tix , Siy) act as nucleation sites.
ISSN: 2367-1181
Appears in Collections:Dept of Mechanical Aerospace and Civil Engineering Research Papers

Files in This Item:
File Description SizeFormat 
FullText.pdf1.24 MBAdobe PDFView/Open

Items in BURA are protected by copyright, with all rights reserved, unless otherwise indicated.