Please use this identifier to cite or link to this item:
Full metadata record
DC FieldValueLanguage
dc.contributor.advisorNilavalan, R-
dc.contributor.authorHaghpanahan, Roohollah-
dc.descriptionThis thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel University London.en_US
dc.description.abstractThis thesis is devoted to potential applications of metamaterials in antenna structures as well as metamaterials behaviour, characterisation, structure design, simulation and extraction of parameters. The focus of this work is on the practical application of metamaterial structures for antenna performance enhancement. This thesis comprises three key parts; In the first part, theory of metamaterials is investigated including fields, polarisation, effective and average parameters, parameters extraction and transmission line (TL) model. In part two, zero index metamaterials (ZIM) theory is studied. The use of ZIM to form a highly directive medium is illustrated. A comparative study between different ZIM structures is conducted with a special attention to their operational bandwidth. ANSYS HFSS is used to model ZIM structures where simulation results show a bandwidth between 7.4% and 14.0%. Then two novel ZIM structures with a bandwidth of up to 33% are proposed. The first proposed ZIM is used to form a highly directive shell. Four directive shells are designed and placed around the dipole antenna where a gain increase of up to 6.8 𝑑𝐵𝑖 is obtained along the desired direction. Further, proposed ZIM cells are integrated with a quasi-Yagi antenna in order to increase its gain. Simulation results demonstrate gain enhancement for frequencies over which the proposed structure expresses ZIM properties. In part three, a new technique is stablished to design a metamaterial lens. The new technique is based on wave interference phenomena where engineered wave interference results in a desired spatial energy distribution. It is shown theoretically that having 180𝑜 phase difference between interfering waves results in a focused emission. Both hypothetical and metamaterial realisation models of a 180𝑜 phase shifter for a patch antenna are designed and simulated where a gain enhancement of 8 𝑑𝐵𝑖 and 5.77 𝑑𝐵𝑖 are achieved, respectively. Further, the concept of intended phase shift between interfering waves is used to design a novel bi-reflectional ground plane which can focus the reflected emission and consequently, increase the antenna directivity. In the theoretical model, the Perfect-E and Perfect-H planes are combined to form a bi-reflectional plane, whereas the practical model is designed using the copper cladding for the Perfect-E plane and the mushroom structure for the perfect-H plane. Both square and hexagonal geometries are used to form the mushroom structure. Simulation results confirm a gain enhancement of 5.4 𝑑𝐵𝑖 for the design using the square mushroom structure and a gain enhancement of 3.3 𝑑𝐵𝑖 for the design using the hexagonal mushroom structure.en_US
dc.description.sponsorshipCollege of Engineering, Design and Physical Sciences, Brunel University London.en_US
dc.publisherBrunel University Londonen_US
dc.subjectZero index materialsen_US
dc.subjectOptical transformationen_US
dc.subjectHigh directive emissionen_US
dc.subjectWave interferenceen_US
dc.subjectElectromagnetic band-gap structureen_US
dc.titleMetamaterials and their applications on antenna gain enhancementen_US
Appears in Collections:Electronic and Computer Engineering
Dept of Electronic and Computer Engineering Theses

Files in This Item:
File Description SizeFormat 
FulltextThesis.pdf8.47 MBAdobe PDFView/Open

Items in BURA are protected by copyright, with all rights reserved, unless otherwise indicated.