Please use this identifier to cite or link to this item: http://buratest.brunel.ac.uk/handle/2438/12516
Full metadata record
DC FieldValueLanguage
dc.contributor.authorJouhara, H-
dc.contributor.authorSzulgowska-zgrzywa, M-
dc.contributor.authorDanielewicz, J-
dc.contributor.authorSayegh, MA-
dc.contributor.authorMilko, J-
dc.contributor.authorNannou, TK-
dc.contributor.authorLester, S-
dc.date.accessioned2016-04-18T13:48:39Z-
dc.date.available2016-04-18T13:48:39Z-
dc.date.issued2016-
dc.identifier.citationEnergy: The International Journal, 2016en_US
dc.identifier.issn0360-5442-
dc.identifier.urihttp://bura.brunel.ac.uk/handle/2438/12516-
dc.description.abstractPhotovoltaic–thermal water collectors have the ability to convert solar energy into electricity and heat, simultaneously. Furthermore, the combination of photovoltaic–thermal solar collectors with a water cooling system can increase significantly the electrical and thermal efficiencies of the system, which can improve the total thermal efficiency of buildings. In this paper, the findings of six experimental configurations of solar-thermal collectors are presented and analysed. Five of the solar-thermal panel configurations were implemented with a cooling cycle. Two of the solar-thermal panels were equipped with monocrystalline silicon modules, the other two collectors were equipped with polycrystalline silicone modules, one of the collectors was based on heat pipe technology and was equipped with a cooling system, while the last collector did not include any cooling cycle. The duration of the experiments was four days during the September of 2014 and they were conducted under different solar radiation conditions. The second part of the paper presents the simulation results for five of the solar-thermal panels connected with a cooling water tank (volume of 500 litre), a domestic hot water tank (volume 350 litre) and a water-water heat pump, in terms of covering the hot water demands of a single family dwelling. The results showed that the hybrid solar collectors would be able to cover approximately 60% of the dwelling’s hot water needs for days with low levels of solar radiation, while for days with high solar radiation they could cover the hot water requirements of the family by 100%.en_US
dc.language.isoenen_US
dc.publisherElsevieren_US
dc.subjectPhotovoltaic–thermal water collector (PV/T)en_US
dc.subjectHeat pipeen_US
dc.subjectHeat pump (HP);en_US
dc.subjectDomestic hot water (DHW)en_US
dc.subjectSolar hybrid collector HP-PV/Ten_US
dc.titleThe performance of a heat pipe based solar PV/T roof collector and its potential contribution in district heating applicationsen_US
dc.typeArticleen_US
dc.identifier.doihttp://dx.doi.org/10.1016/j.energy.2016.04.070-
dc.relation.isPartOfEnergy International-
pubs.publication-statusAccepted-
Appears in Collections:Dept of Mechanical Aerospace and Civil Engineering Research Papers

Files in This Item:
File Description SizeFormat 
FullText.pdf982.38 kBAdobe PDFView/Open


Items in BURA are protected by copyright, with all rights reserved, unless otherwise indicated.