Please use this identifier to cite or link to this item:
Full metadata record
DC FieldValueLanguage
dc.contributor.authorDenia, FD-
dc.contributor.authorSánchez-Orgaz, EM-
dc.contributor.authorMartínez-Casas, J-
dc.contributor.authorKirby, R-
dc.identifier.citationFinite Elements in Analysis and Design, 101: 46 - 57, (2015)en_US
dc.description.abstractA mixed finite element model has been derived for the acoustic analysis of perforated dissipative silencers including several effects simultaneously: (1) High temperature and thermal gradients in the central duct and the outer absorbent material; (2) a perforated passage carrying non-uniform axial mean flow. For such a combination, the properties of sound propagation media and flow are inhomogeneous and vary with position. The material of the outer chamber can be modelled by its complex equivalent acoustic properties, which completely determine the propagation of sound waves in the air contained in the absorbent medium. Temperature gradients introduce variations in these properties that can be evaluated through a heterogeneous temperature-dependent resistivity in combination with material models obtained at room temperature. A pressure-based wave equation for stationary medium is then used with the equivalent density and speed of sound of the absorbent material varying as functions of the spatial coordinates. Regarding the central air passage, a wave equation in terms of acoustic velocity potential can be used to model the non-uniform moving medium since the presence of temperature variations introduce not only heterogeneous acoustic properties of the air but also a gradient in the mean flow velocity. The acoustic connection between the central passage and the outer chamber is given by the acoustic impedance of the perforated duct. This impedance depends on the heterogeneous properties of the absorbent material and the non-uniform mean flow, leading to a spatial variation of the acoustic coupling and also to additional convective terms in the governing equations. The results presented show the influence of temperature, thermal gradients and mean flow on the transmission loss of automotive silencers. It has been found that high temperature and thermal-induced heterogeneity can have a significant influence on the acoustic attenuation of an automotive silencer and so should be included in theoretical models. In some particular configurations it may be relatively accurate to approximate the temperature field by using a uniform profile with an average value, specially for low resistivity materials. It has been shown, however, that this is not always possible and attenuation overestimation is likely to be predicted, mainly for high radial thermal gradients and high material flow resistivities, if the temperature distribution is not taken into account.en_US
dc.description.sponsorshipAuthors gratefully acknowledge the financial support of Ministerio de Economía y Competitividad and the European Regional Development Fund (projects DPI2010-15412 and TRA2013-45596-C2-1-R), Generalitat Valenciana (project Prometeo/2012/023) and Universitat Politècnica de València (PAID-05-12, project SP20120452).en_US
dc.format.extent46 - 57-
dc.subjectHigh temperatureen_US
dc.subjectAbsorbent materialen_US
dc.titleFinite element based acoustic analysis of dissipative silencers with high temperature and thermal-induced heterogeneityen_US
dc.relation.isPartOfFinite Elements in Analysis and Design-
Appears in Collections:Dept of Mechanical Aerospace and Civil Engineering Research Papers

Files in This Item:
File Description SizeFormat 
Fulltext.pdf545.93 kBAdobe PDFView/Open

Items in BURA are protected by copyright, with all rights reserved, unless otherwise indicated.