Please use this identifier to cite or link to this item: http://buratest.brunel.ac.uk/handle/2438/8721
Title: Design and analysis of a piezoelectric film embedded smart cutting tool
Authors: Rakowski, R
Cheng, K
Keywords: Piezoelectric film;Force shunt measurement;Smart cutting tool;Cross-sensitivity
Issue Date: 2013
Publisher: Sage Publications
Citation: Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 227(2), 254 - 260, 2013
Abstract: The condition of a cutting tool is an important factor for manufacturing processes. Tool wear has a strong influence on the cutting forces, resulting in poor surface roughness and dimensional accuracy of the workpiece. Therefore, the use of a dynamometer to measure cutting forces is a well-known approach, but it has several limitations such as high cost, poor performance in harsh industrial machining environments and possible interference with cutting dynamics. This article presents a novel smart cutting tool using a separate single-layer piezoelectric film as the sensing unit to detect the orthogonal cutting force. Simulations were performed to validate the feasibility of the proposed design, and the model was also able to detect better force measurement sensitivity. Furthermore, cutting trials were carried out to validate cutting tool performance experimentally.
Description: This is the author's accepted manuscript. The final published article is available from the link below. Copyright @ 2012 Institution of Mechanical Engineers.
URI: http://pib.sagepub.com/content/227/2/254
http://bura.brunel.ac.uk/handle/2438/8721
DOI: http://dx.doi.org/10.1177/0954405412462785
ISSN: 0954-4054
Appears in Collections:Mechanical and Aerospace Engineering
Dept of Mechanical Aerospace and Civil Engineering Research Papers

Files in This Item:
File Description SizeFormat 
Fulltext.pdf753.44 kBAdobe PDFView/Open


Items in BURA are protected by copyright, with all rights reserved, unless otherwise indicated.