Please use this identifier to cite or link to this item:
|Title:||Rectangular Steel Silos: Finite Element Predictions of Filling Wall Pressures|
|Abstract:||The pressures exerted on the walls of rectangular planform steel flexible-walled silos by several different stored granular bulk solids are investigated using a validated finite element model that has been used in several previous studies. These pressures and the state of stress in the bulk solid are explored for a range of silo geometries and stored bulk solids. The results show that the horizontal pressure distribution across a silo wall is generally not uniform. This demonstrates that widely used theories may be adequate for stiff concrete silos, are far from suited to flexible-walled steel silos, and the differences can be used to produce much lighter structures. These findings match previously published experimental and analytical results for square planform silos where much larger pressures develop in the corners. The present analyses show that rectangular silos differ from those of square section, in that the mean pressure and degree of pressure variation is different on the two walls. The mechanisms causing these changes are investigated. The results further demonstrate that relatively small changes in the properties of a stored solid can produce significant changes in the pressure magnitudes and patterns, and hence greatly influence the silo structural design. The paper concludes that existing design guidance is seriously deficient and leads to metal silos that are considerably more expensive than is necessary.|
|Appears in Collections:||Dept of Mechanical Aerospace and Civil Engineering Research Papers|
Files in This Item:
|Fulltext.pdf||File is embargoed untill 21/11/2018||750.46 kB||Adobe PDF||View/Open Request a copy|
Items in BURA are protected by copyright, with all rights reserved, unless otherwise indicated.