Please use this identifier to cite or link to this item: http://buratest.brunel.ac.uk/handle/2438/13350
Title: An investigation of surface defect formation in micro milling the 45% SiCp/Al composite
Authors: Liu, J
Cheng, K
Ding, H
Chen, S
Zhao, L
Keywords: Simulation;SiCp/Al composites;Micro milling;Surface defect
Issue Date: 2016
Publisher: Elsevier
Citation: Procedia CIRP, 45: pp. 211 - 214, (2016)
Abstract: In this paper, an orthogonal cutting simulation on machining 45% SiC/Al composites is presented for develop an in-depth understanding of surface defects in micro milling of the SiCp/Al composites and the associated machining parameters. PCD micro end mill is used with the value of the cutting edge radius close to the SiC particle size. The material removal mechanism and the surface defect formation at three typical cases are analysed. The results indicate the main machined surface defect is affected by the tool-particle interaction location. The half interaction location might lead to the best surface quality, which is proved by cutting trials and experimental observation.
URI: http://www.sciencedirect.com/science/article/pii/S2212827116006223
http://bura.brunel.ac.uk/handle/2438/13350
DOI: http://dx.doi.org/10.1016/j.procir.2016.02.327
ISSN: 2212-8271
Appears in Collections:Dept of Mechanical Aerospace and Civil Engineering Research Papers

Files in This Item:
File Description SizeFormat 
Fulltext.pdf338.8 kBAdobe PDFView/Open


Items in BURA are protected by copyright, with all rights reserved, unless otherwise indicated.