Please use this identifier to cite or link to this item: http://buratest.brunel.ac.uk/handle/2438/12989
Title: A simple, low-cost platform for real-time isothermal nucleic acid amplification
Authors: Craw, P
Mackay, RE
Naveenathayalan, A
Hudson, C
Branavan, M
Sadiq, ST
Balachandran, W
Keywords: Point-of care;Molecular diagnostics;Isothermal amplification;Nucleic acid amplification test (NAAT);Helicase dependent amplification
Issue Date: 2015
Publisher: MDPI
Citation: Sensors, 15(9): pp. 23418 - 23430, (2015)
Abstract: Advances in microfluidics and the introduction of isothermal nucleic acid amplification assays have resulted in a range of solutions for nucleic acid amplification tests suited for point of care and field use. However, miniaturisation of instrumentation for such assays has not seen such rapid advances and fluorescence based assays still depend on complex, bulky and expensive optics such as fluorescence microscopes, photomultiplier tubes and sensitive lens assemblies. In this work we demonstrate a robust, low cost platform for isothermal nucleic acid amplification on a microfluidic device. Using easily obtainable materials and commercial off-the-shelf components, we show real time fluorescence detection using a low cost photodiode and operational amplifier without need for lenses. Temperature regulation on the device is achieved using a heater fabricated with standard printed circuit board fabrication methods. These facile construction methods allow fabrications at a cost compatible with widespread deployment to resource poor settings
URI: http://www.mdpi.com/1424-8220/15/9/23418
http://bura.brunel.ac.uk/handle/2438/12989
DOI: http://dx.doi.org/10.3390/s150923418
ISSN: 1424-8220
Appears in Collections:Publications

Files in This Item:
File Description SizeFormat 
Fulltext.pdf1.86 MBAdobe PDFView/Open


Items in BURA are protected by copyright, with all rights reserved, unless otherwise indicated.