Please use this identifier to cite or link to this item: http://buratest.brunel.ac.uk/handle/2438/11895
Title: Wiebull analysis for the repeatibility of die castings made by an al-mg-si-mn alloy
Authors: Ji, S
Yang, H
Watson, D
Fan, Z
Keywords: Aluminium alloys;Casting;Mechanical property;Microstructure;Weibull analysis
Issue Date: 2016
Publisher: TMS USA
Citation: Light Metals -Warrendale- Proceedings, TMS, Nashville, Tennessee, 14-18 February 2016
Abstract: The Weibull statistical model with three parameters has been used to assess the repeatability of the high pressure die-castings made by an Al-Mg-Si-Mn alloy. It was found that the round samples had a maximum Weibull modulus, indicating the best repeatability. The machined samples exhibited the second best of Weibull modulus. Among the square samples, the 2 mm thick samples had the lowest and the 5 mm thick samples had the highest Weibull modulus, indicating that the repeatability was worsened for the castings with thinner wall thickness. The microstructural uniformity and porosity levels are critical factors in determining the repeatability of high pressure die-castings.
URI: http://www.programmaster.org/PM/PM.nsf/ApprovedAbstracts/597E4E2483F1733985257E69003D4F11?OpenDocument
http://bura.brunel.ac.uk/handle/2438/11895
ISSN: 0147-0809
Appears in Collections:Brunel Centre for Advanced Solidification Technology (BCAST)

Files in This Item:
File Description SizeFormat 
Fulltext.docx3.02 MBUnknownView/Open


Items in BURA are protected by copyright, with all rights reserved, unless otherwise indicated.