Please use this identifier to cite or link to this item: http://buratest.brunel.ac.uk/handle/2438/10719
Title: Single domain YBCO/Ag bulk superconductors fabricated by seeded infiltration and growth
Authors: Iida, K
Babu, NH
Shi, Y
Miyazaki, T
Sakai, N
Murakami, M
Cardwell, DA
Keywords: Seed infiltration and growth;Bulk Superconductors;Liquid Nitrogen Temperature
Issue Date: 2008
Citation: Journal of Physics: Conference Series, 2008, 97 (1)
Abstract: We have applied the seeded infiltration and growth (IG) technique to the processing of samples containing Ag in an attempt to fabricate Ag-doped Y-Ba-Cu-O (YBCO) bulk superconductors with enhanced mechanical properties. The IG technique has been used successfully to grow bulk Ag-doped YBCO superconductors of up to 25 mm in diameter in the form of single grains. The distribution of Ag in the parent Y-123 matrix fabricated by the IG technique is observed to be at least as uniform as that in samples grown by conventional top seeded melt growth (TSMG). Fine Y-211 particles were observed to be embedded within the Y-123 matrix for the IG processed samples, leading to a high critical current density, Jc, of over 70 kA/cm2 at 77.3 K in self-field. The distribution of Y-211 in the IG sample microstructure, however, is inhomogeneous, which leads to a variation in the spatial distribution of Jc throughout the bulk matrix. A maximum-trapped field of around 0.43 T at 1.2 mm above the sample surface (i.e. including 0.7 mm for the sensor mould thickness) is observed at liquid nitrogen temperature, despite the relatively small grain size of the sample (20 mm diameter × 7 mm thickness).
URI: http://bura.brunel.ac.uk/handle/2438/10719
DOI: http://dx.doi.org/10.1088/1742-6596/97/1/012105
ISSN: 1742-6588
1742-6596
Appears in Collections:Brunel Centre for Advanced Solidification Technology (BCAST)

Files in This Item:
File Description SizeFormat 
FullText.pdf1.26 MBAdobe PDFView/Open


Items in BURA are protected by copyright, with all rights reserved, unless otherwise indicated.